AMTRA SHALLOW

↓ Description

Kit consisting of:

AMTRA SHALLOW TANK cm 75x50x30 / glass thickness 8mm / 110 liters : Open tank made of EXTRA-WHITE glass 8mm to set up splendid freshwater aquariums in “Aquascaping” style, Reef reef aquariums or biotopes for shrimps and ” Caridina “. Precise construction with transparent silicone finishes that guarantee a simple, clean and elegant design.

CABINET AMTRA SHALLOW 75×50 WALNUT “TOWER” – Dark walnut solid wood cabinet handmade in Italy by skilled and expert craftsmen.
Hardware in AISI316 stainless steel The AMTRA SHALLOW SUPPORT commonly called “TOWER” is used to support the AMTRA SHALLOW tank measuring 75x50x30cm.
Design object born to furnish your home in a modern way.
Cabinet height: 95cm. The increased height compared to a traditional aquarium cabinet was specifically designed to compensate for the reduced height of the tank (only 30cm).
The “rusticating” and “painting” of the wood are done entirely by hand to give the product a natural and ancient character.
Since each piece is handmade and in solid wood, any small imperfections are to be considered as characterizing the uniqueness of the product itself and not as defects.

AMTRA FILPO CLICK– innovative line of compact internal filters for aquariums with intelligent system for replacing the pre-filter: the front cartridge, useful for mechanical and chemical water filtration, can be replaced in just one “CLICK”, without removing the filter from the aquarium. This allows to preserve the filtering bacterial flora present in the biological materials housed inside the filter. In this way it is possible to clean the filter without risking to lose the important bacterial filtering mass, thus ensuring an aquarium stable over time and always crystal-clear water.
Inside the large filter body are housed the materials for the biological filtration of water: sponge and sintered glass balls with very high porosity for the installation of both nitrifying and denitrifying bacteria.
Installation is very simple and quick: the filter must be positioned inside the aquarium, fixing it to the glass using the suction cups supplied.
Adjustable water flow rate and “Spray bar” included to improve the oxygenation of the water if necessary.
The pre-filter cartridge supplied as standard (CARTUCCIA CARBONE FILPO CLICK) is made of activated carbon plus filter wool. It is recommended to rinse the cartridge under running water every 7-10 days and to replace it every 15-20 days to always guarantee the correct flow of water to the pump and to keep the filtering power of the activated carbon unchanged. This cartridge is for single use.
In addition to the CARBON CARTRIDGE FILPO CLICK, the range includes a cartridge with 3 replaceable activated carbon sponges (CARTUCCIA SPUGNA FILPO CLICK): in this case the plastic front of the cartridge acts as a support for the pre-cut sponges that can also be purchased individually as spare consumables (SPUGNA CARBONE FILPO CLICK). Also for these sponges we recommend washing every 7-10 days and complete replacement every 15-20 days.
Suitable for use in both freshwater and saltwater aquariums.

AMTRA LED SYSTEM FRESH – line of complete and professional LED bars specific for the lighting of freshwater aquariums. Thanks to the high degree of protection (IP67) it can be used both in open tanks and in closed aquariums.

Included Wi-Fi receiver (2.4 GHz) to programming THROUGH THE AMTRA APP the daily solar lighting cycle of your aquarium. The bar consists of 3 different types of LEDs: LED WHITE Cool White 6500°K, LED WHITE Warm White from 4000°K, LED RGB. The LEDs are programmable on 5 different channels to guarantee the maximum degree of customization of the emitted wavelength.

The lamp can be used in “off-line” mode (turned on at full power or turned off using the button on the Wi-Fi receiver or with a mechanical timer not included in the package) or it can be managed entirely by the specific APP AMTRA Wi-Fi (2.4 GHz). Through the app you can control the lamp in MANUAL mode by setting the different channels in the specific screen of the APP, or in automatic mode by pre-setting the daily light cycle. The programming of the automatic mode is easily set through the APP: you can set the “sunrise” and “sunset” times as well as the light intensity at “full day” and “full night”. Once everything has been programmed, the lamp will start to work in AUTOMATIC mode: at the stroke of the “sunrise” time the LEDs will gradually pass from “full night” to “full day” while at the “sunset” time the LEDs will gradually switch from “Full day” to “full night”.

Two different systems are provided in the package for fixing to the glass edge or to facilitate their installation in closed tanks. The arms are adjustable in length, allowing a maximum extension of 15 cm on each side. In addition, the glass edge supports for open tanks also allow its height adjustment with respect to the surface of the water (maximum glass thickness 15mm).
Extremely robust thanks to the aluminum body (which also acts as a heat sink for the heat developed) and the ABS joints. Extremely powerful, thanks to the practical programming possibilities, they guarantee excellent lighting of both heavily planted pools with Aquascaping technique and of community aquariums and cichlids from the great African lakes.

↓ Video

↓ Details

• ITEM CODE: A2001882
• EAN: 8023222228825
• LANGUAGES ON PACKAGING: DE-IT-EN-FR-ES-PT-NL-GR-RU-RO-HR-UA

↓ Download