Sale!

AMTRA SKIMMER HANG ON 100

AMTRA SKIMMER HANG ON 100 – hanging skimmer for marine aquariums up to 100 liters

Features:

Compact “backpack” hanging external skimmer for marine aquariums up to 100 liters
Overall dimensions on the glass edge: 17,5 cm. Max glass thickness 19mm. Dimensions: base 17,5 x 9,5 cm. Height up to collection cup 19.5 cm + cup height 6.5 cm. Water flow rate 500 lt / h-6.6 Watt
Also equipped with activated carbon cartridge. In addition, the sponge placed on the water outlet will help prevent air bubbles from going into the aquarium and complete biological filtration
Equipped with a special needle impeller to create very fine air bubbles and to optimize their mixing with water in order to obtain a performing skimming.
Efficient device to avoid problems caused by accumulation of proteins and polluting substances. Indispensable for coral reef aquariums and recommended for fish only aquariums

51,99€

In stock

Additional information
↓ Description
↓ Details
↓ Download
↓ Spare parts

Additional information

Weight	1,3 kg

↓ Description

AMTRA SKIMMER HANG ON 100 is a compact and elegant external “backpack” skimmer for marine aquariums up to 100 liters. This filtering device is useful for solving water pollution problems caused by the accumulation of proteins and polluting substances. Indispensable for coral reef aquariums, it is also highly recommended for aquariums where only saltwater fish are housed.
To complete the chemical filtration of the water in the skimmer there is also a special activated carbon cartridge (it is recommended to rinse this cartridge every 7-10 days and to replace it completely every 15-20 days). While a sponge will help both to prevent air bubbles from going into the aquarium and to complete the biological filtration of the water.
Equipped with a special needle impeller to create very fine air bubbles and to optimize their mixing with water in order to obtain a performing skimming.
Extremely easy to assemble and put into operation, sold in Plug & Play format: place the skimmer on the edge of the aquarium taking care to immerse the suction tube protected by the specific grid correctly in water. Remove the collection cup and fill the skimmer body with aquarium water. Put the collection cup back in place and connect the plug to the power supply. The pump will start starting to suck water from the aquarium. It will take a few minutes for the tube to be completely clogged and the water flow constant. To facilitate this operation, it is necessary to completely close the air regulation tap located inside the collection cup. Once the flow of water in the filter is constant, it will be possible to adjust the skimming by acting on the tap to increase or decrease the quantity of air sucked.

SIZE:
Space occupied by the pool: length 17.5 cm // maximum glass thickness 19 mm
External dimensions of the tank: base 17.5 x 9.5 cm // height up to the collection cup 19.5 cm + height of the collection cup 6.5 cm

Hourly water flow rate pump 500 lt / h – Power 6.6 Watt

Suitable for exclusive use in sea water.