AMTRA BOREA 80 LED

AMTRA BOREA 80 LED – cooling fan for aquarium with LED lighting system for moonlight / actinic light

Features:

Cooling fan for aquarium with automatic temperature control system and LED lighting (moon/actinic). Ideal for decreasing the temperature of the water into aquarium of a few degrees during the hottest season
For aquariums from 15 to 80 liters
Replaceable probe for detecting the water temperature, integrated display to be able to read the water temperature at any time.
Fan speed, LED light intensity and temperature to keep easily adjustable.
Acrylic support for installation on glass of thickness up to 12mm, adjustable radial fan

69,99€

In stock

Additional information
↓ Description
↓ Video
↓ Details
↓ Download
↓ Spare parts
↓ Press - Media

Additional information

Weight	0,32 kg

↓ Description

AMTRA BOREA 80 LED: cooling fan for aquarium with automatic temperature control system and LED for moonlight / actinic lighting. Equipped with an accurate probe for detecting the water temperature.
The radial fan can be swivelled and adjusted to 5 different speeds to adapt it to multiple situations of tank sizes and desired temperature: once the temperature has been set, the fan will operate autonomously, switching on and off when temperature is reached. Water temperature can also be at any time on the display.
Operation and setting are extremely simple: the display screen constantly shows the temperature value detected by the probe. When the temperature detected by the probe is more or equal to the temperature to be kept set, the fan starts operating (at the settled speed). When the temperature detected by the probe is lower than the set temperature, the fan stops working.
FAN SPEED SETTING: pressing the “-” key for 3 seconds will show the fan speed set on the display. At this point, short press “-” to decrease the fan speed, or “+” to increase the fan speed. When no operation is performed for 6 seconds, a “9” appears on the display and the set speed is memorized.
TEMPERATURE SETTING TO BE MAINTAINED: pressing the “+” key for 3 seconds, the currently set temperature value will be shown on the display. At this point briefly press “-” or “+” to reduce or increase the temperature to be maintained. When no operation is performed for 6 seconds, a “9” appears on the display and the set speed is memorized.
MOON LED SETTING: press the “LED” button to adjust the brightness of the moon LED. When no operation is performed for 2 seconds, the set brightness is stored. The LED has a maximum power of 4.5 watts.
The supplied acrylic support allows it to be installed on edges up to 12mm thick.
The probe can be easily replaced in the event of a malfunction. Spare part number: A9013489

For aquariums from 15 to 80 litres suitable for use in both freshwater and seawater aquariums.